Contact : +91 88076 83853,9884486471 Email : sales@barathienterprises.in
General Lab Equipments Trainer Kits for
  • Home
  • General Lab Equipments Trainer Kits for
General Lab Equipments Trainer Kits for

I.Power Supplies

1.DC Regulated Power Supply - Variable 0-30V, 2A
  • 0-30 V, coarse and fine control
  • 0 – 2 A current limit – coarse and fine control
  • Digital displays for voltage and current
  • Over load and short circuit protected
2.Dual DC Regulated Power Supply - Variable 0-30V, 2A
  • 2 nos. 0-30 V, coarse and fine control
  • 2 nos. 0-2 A current limit – coarse and fine control
  • Digital displays for voltage and current for both power supplies
  • Overload and short circuit protected
3a.High Voltage DC Regulated Power Supply
  • 0-100V, 0 – 1A
  • Digital displays for voltage and current
  • Over load and short circuit protected
3b.High Voltage DC Regulated Power Supply
  • 0-300 V variable voltage control
  • 0-100 mA current limit
  • Digital displays for voltage and current
4.Dual Fixed output DC regulated power supply
  • ± 15V, 1A continuously variable voltage output
  • Coarse and fine knobs in each track
  • 4 nos. of digital meters to read voltage and current in both track
5.Multiple Power Supply
  • +5V, 1A
  • ± 12V or ± 15V Fixed Power Supply, 500 mA

II.Oscillators and Function Generators

1a.1 MHz Function Generator with Digital Readout
  • 1 MHz Frequency range: 1 MHz in 6 decades and fine control
  • Output waveforms: Sinusoidal, Triangle, Square, Ramp, Pulse, TTL
  • Duty cycle: 10% to 90% variable
  • Maximum output voltage: Into 50 ohms, 10V pp output Open circuit, 20V pp output
  • DC offset adjustment ± 2.5V
  • Display: 4 digit seven segment display for frequency
  • Output impedance; 150 Ohms
1b.2 MHz Function Generator with Digital Readout
  • 1 Hz to 2 MHz coarse and fine tuning and with same specification as 1 MHz function generator
1c.3 MHz Function Generator with Digital Readout
  • 3 Hz to 3 MHz coarse and fine tuning and with same specification as 1 MHz function generator
2.Audio Oscillator/Signal Generator
  • 1 Hz to 1 MHz
  • Sine and Square, 0-20V P-P
  • Output short circuit protected

III.Simulation software and data acquisition module

National Instruments Simulation software with data acquisition module
  • Data acquisition using National Instruments myDAQ USB based data acquisition module
  • 8 digital inputs/outputs, 2 analog inputs, 2 analog outputs
  • Digital Multimeter inputs, resistance measurement
  • LabVIEW and simulation software Multisim Student version license
  • LabVIEW software based data acquisition and processing
  • Application Board with IC Breadboard

IV.Electronic Laboratory Bench

Electronic Laboratory workbench with built in Power Supply
  • Height : 84 cms, (2 ¾ feet)
  • Length : 183 cms (6 feet)
  • Width : 91 cms (3 feet)
  • 5A Socket – 8 nos
  • Mains Switch and 15A Plug with wires
  • 4 Normal doors (19 mm thickness), in front side to keep the equipments
  • Wooden legs
  • Good quality Sun mica lamination
  • 30V, 2A, ± 15V, 200 mA, +5V, 1A DC Regulated Power Supplies

V.IC Trainers

1.IC TRAINER – Smart
  • One IC Bread board to accommodate 8 numbers of 16 pin ICs
  • +5V, 1A and ± 15V, 250 mA DC Regulated Power Supply
  • 8 numbers of De bounced Switch inputs
  • 8 numbers of Buffered LED outputs
  • 0.5 Hz to 50 Hz Variable Clock Generator
  • 100 msec. Single pulse output (buffered +ve and –ve outputs)
  • One Seven Segment Display with 4 BCD inputs
2.IC TRAINER – Max
  • Two IC Bread boards to accommodate 16 numbers of 16 pin ICs
  • +5V, 1A and ± 15V, 250 mA DC Regulated Power Supply
  • 16 numbers of De bounced Switch inputs
  • 16 numbers of Buffered LED outputs
  • 1Hz to 10 Hz, 10 Hz to 100 Hz and 100 Hz to 1 KHz Variable Clock
  • 100 msec. Single pulse output (buffered +ve and –ve outputs)
  • 2 nos. of Seven Segment Displays with BCD Inputs
  • 2 nos. of Potentiometers to use it as variable resistor or as potential divider to give inputs to the analog experiments
  • Experiments on multiplexer and de multiplexers can also be carried out making use of these inputs and outputs
3.Linear IC Trainer Kit
  • One no. IC Breadboard to accommodate 8 nos. of 16 pin ICs
  • ± 15V, 500mA, +5V, 500mA Power Supplies
  • 2 nos. 0-15V, 250mA Power Supply
  • 200KHz Signal generator with sine, square and Triangular output
  • AC source 6-0-6V and 12-0-12V
  • 4 nos. of Potentiometers
  • To carry out op amp experiments

VI.Decade Resistance, Capacitance and Inductance Boxes

1a.Decade Resistance Box
  • 1 ohm to 1 Meg ohm
  • 6 dials, x1, x10, x100, x1K, x10K, x100K
  • 2 watt, 1% resistances
  • Good Quality Thumb wheel switches
1b.Decade Resistance Box
  • 1 ohm to 1 Meg ohm
  • 6 dials, x1, x10, x100, x1K, x10K, x100K
  • 2 watt, 1% resistances
  • Good Quality Rotary Switches
2.Decade Capacitance Box
  • 0.001 μF to 11 μF
  • 5 dials x100 pF, x0.001μF, x0.01μF, x0.1μF, x1μF Good Quality Rotary Switches
3.Decade Inductance Box
  • 0.1 mH to 11 H
  • 5 dials 100 μH, x1 mH, x10 mH, x100mH, 1 H
  • Good Quality Rotary Switches

VII.Digital Meters

1.Desktop digital voltmeters - 3 ½ digit meters
  • DC 0-200mV
  • DC 0-2V
  • DC 0-20V
  • DC 0-200V
  • AC 0-200mV
  • AC 0-2V
  • AC 0-20V
  • Ac 0-200V
2.Desktop digital Ammeters - 3 ½ digit meters
  • DC 0-20mA
  • DC 0-200mA
  • DC 0-2A
  • DC 0-20A
  • AC 0-200mA
  • AC 0-2A
  • AC 0-20A
3.Graphics LCD based digital / analog like meters (panel or desktop meters)
  • DC Voltmeters
  • DC Ammeters
  • AC Voltmeters
  • DC Voltmeters
  • AC mains frequency meter
  • Single phase Power factor meter
  • Single phase Wattmeter
  • Single phase Energy meter
  • AC Multifunction meters

VIII.Oscilloscopes

1a. 50 MHz Dual Channel Digital Sampling and Storage Oscilloscope Scientific make, SMO 502 model
  • Signal Bandwidth: 50 MHz
  • Real time sampling: Max 500 MSa/s equivalent sampling rate: Max 50 GSa/s
  • 7.0" TFT LCD Color display
  • 32 kpts memory depth
  • Independent vertical scale & position control knobs for each channel
  • Edge, Pulse Width, video, Slope, Alternate trigger mode
  • Math functions including Add, Subtract, Multiply, Divide & 1024 point FFT
  • 32 parameters of automatic measurements
  • Unique Digital Filter & waveform recorder function
  • Advanced cursor modes: Manual, Auto & Track
  • Waveform Intensity & Grid Brightness can be adjusted
  • PASS/ FAIL detection, PASS/FAIL output
  • Built-in 50 MHz hardware frequency counter
  • Save/recall types: Setups, Waveforms, CSV file, Picture
    Standard Interface:
  • USB Host: Support US flash driver save/ recall function & update firmware
  • USB Device: Support PictBridge compatible printer & support PC remote control, RS 232, Pass/ fail output
  • 1 Year warranty
1b. 100 MHz Dual channel Digital Sampling and Storage Oscilloscope GWINSTEK make, Model: GDS-1102-U
  • Signal Bandwidth: 100 MHz
  • 250MSa/s real time sample rates maximum, 25GSa/s equivalent time
  • 5.7” TFT LCD display
  • 4k points per channel record length
  • 2mV to 10V vertical scale, 1ns to 50s horizontal range
  • Math Function: Add, Subtract, FFT rms and zoom FFT measurement
  • auto/normal trigger
  • Up to 19 automatic measurements,
  • Digital storage counter function, zoom FFT, cursor readout, auto-set
  • 1M Ohm input impedance
  • Fast horizontal position mark and search
  • Auto measurement gating, flexible probe factor setting
  • GO/NOGO function, PC remote control software, data logger
  • Observation expand by ground/centre observation-delay on/ off
  • 230V AC power source
  • 5 years warranty