Contact : +91 88076 83853,9884486471 Email : sales@barathienterprises.in
Microcontroller, Embedded Systems Lab
  • Home
  • Microcontroller, Embedded Systems Lab
Microcontroller, Embedded Systems Lab

Microprocessor Trainer Kits

1. 8085 Microprocessor Trainer Kit
  • 8085 microprocessor
  • 8279 IC based display / keyboard
  • 8 function keys, 16 hex keys and 6 digits seven segment display
  • 3 nos. of 8 bit ports for the user (8255) in the 26 pin FRC Connector
  • 8 bit bar graph LED display
  • 8253 IC based 3 nos. of 16 bit timers
  • User Interrupt key
  • 8251 IC based Serial Port to download program from PC
  • Software to download Hex file
  • 8 K RAM and 16K ROM expansion socket
  • Necessary data lines, address lines and control lines in the expansion connector
  • Built in Power supply, Casing to keep the kit safe and detailed manual
2. 8086 Microprocessor Trainer Kit
  • Intel 8086 CPU at 6.144MHz clock speed
  • 64KB for monitor EPROM
  • 64KB RAM
  • Battery backup provision for RAM up to 64KB
  • 16x2 Alphanumeric LCD display
  • 101 Key IBM compatible Keyboard
  • 24 TTL I/O lines brought out to two nos. of 26 pin FRC connector
  • 1 number of standard RS 232C compatible serial port brought out to a pin D type male connector
  • 3 Channel 16 bit counter/timer using 8253
  • Fully buffered address data and control signals terminated at 50 pin header for Bus expansion
  • Necessary built in power supply, Casing to keep the kit safe and detailed user manual

Microcontroller Trainer Kits

8051 Microcontroller Kits

1. 8051 Micro controller Kit
  • 89C52 micro controller, 12 MHz, 8K Flash ROM and 256 bytes internal RAM
  • 8 K RAM and 16K ROM expansion socket
  • 8279 IC based display / keyboard
  • 8 function keys, 16 hex keys and 6 digits seven segment display
  • 8 bit bar graph LED display, 8 bit DIP switch input
  • Port 1 pin outs and to use Port 1 using 4 Switches and 4 LEDs
  • Timer 0 pulse input push switch and Int 0 input push switch
  • 3 nos. of 8 bit ports for the user (8255) in the FRC connector
  • Serial Facility and windows based Software to download Hex file from PC to Kit
  • Necessary data lines; address lines and control lines in the expansion connector
  • Built in Power supply
2. 8051 Micro controller Kit - In System Programming
  • 89S52 micro controller, 12 MHz, 8K Flash ROM and 256 bytes internal RAM
  • In System Programming facility
  • 8 Toggle switches, 8 LEDs
  • Hex Keyboard and 4 nos. of seven segment display
  • Timer 0 pulse input push switch and Int 0 input push switch
  • USB based Programming port / Serial Port
  • External 26 pin FRC Connector with P0, P1 and P2 Port – for interface boards
  • Built in Power supply
3. 8051 Microcontroller Development board
  • 89S52 Microcontroller based
  • ISP Programmer using USB
  • 8 switches and 8 LEDs, Relay, Buzzer
  • 2 nos. seven segment display, one no. 6 x 2 LCD
  • RTC with battery backup
  • RST switch, Timer 0 switch, Int1 switch
  • 26 pin FRC connector to connect external interface (3 ports)
  • 10 pin FRC connector to connect 4th port
  • USB serial Port
  • Built in Power supply
4. 8051 Microcontroller Kit with single line assembler
  • 89S51 Microcontroller, 12 MHz
  • Program / Data Memory RAM – 32K
  • Program Memory EPROM – 32K (with single line assembler and disassembler)16x2 LCD display
  • PC USB keyboard is provided
  • Reset and Interrupt keys are provided
  • One no. 8255 and connections are terminated in one 26 pin FRC header (24 I/O lines)
  • Parallel System bus expansion 26 pin connector
  • 1 no. 50 pin FRC connector for bus signals
  • Digital I/O on board 8 digit inputs can be given through 8 way DIP switch
  • On board 8 digital outputs can be visible through bar graph LEDs
  • On board serial port terminated in 9 pin D type Male connector
  • Built in Power supply: Input 230V AC, output +5V,2A
  • Battery backup: 1 no. of 3V Lithium battery/3.6V NICD battery
  • Housed in a sleek wooden cabinet
5. 16F877A based PIC Trainer Kit
  • PIC 18F4550/16F877A, 20 MHz - 40 pin, 8 bit controller
  • In System Programming through Serial Port(1)
  • 8 switches, 8 LEDs, 3 nos. of seven segment display
  • 2 Line Text LCD display, 2 analog input
  • Provision to use built in comparator
  • Provision to practice Capture, Compare and to PWM
  • Serial Port Connectivity to the PC(2)
  • I2C Compatible digital I/O for practicing I2C Programming
  • All the ports are terminated in the end connector for external use
  • USB Port to ISP programming
  • Built in Power supply and Casing
  • User Manual and sample programs
  • MPLAB IDE for programming in Assembly Language
6.AVR Microcontroller Development Board
  • CPU: ATMEL ATMEGA 32 Microcontroller
  • On board Programmer using USB Port
  • Power Supply switch on/off on board
  • All the 32 I/O lines should be available to the user through 8 bit port FRC Connectors
  • Downloading cable – 1 no. and 10 pin FRC cable – 4 nos.
  • Software: ATMEL Studio Editor, Assembly and C Compiler Compatibility
  • Built in Power Supply and closed wooden box
  • Detailed manual
7. AVR ATmega32 Trainer Kit
  • ATmega32 IC, 16 MHz Crystal Oscillator
  • USB Programmer
  • External interrupt and reset button
  • 8 switches and 8 LEDs
  • 7 segment display
  • 16 x 2 Alphanumeric LCD interface
  • 4 x 4 Matrix Keyboard interface
  • USB serial port
  • RTC with crystal and battery
  • Potentiometer for ADC
  • ultrasonic sensor
  • power supply
8. ARM 7 – TDMI LPC 2148 Controller Trainer Kit
Features
  • ARM 7 – LPC 2148 Controller, 32 bit controller
  • USB Port for In System Programming facility
  • User External Interrupt, Timer/Counter Switch inputs,
  • 4 x 4 Matrix Keyboard and Single digit seven segment display
  • Buzzer and Relay, 2 line Text LCD display
  • I2C device interface for Serial EEPROM,
  • I2C interface for 7 Segment display and Real time clock
  • Temperature sensor LM 35, Provision to test On-chip ADC, PWM Signal output
  • Serial Port for transmission from Kit and reception from PC
  • 8 nos. of switch inputs and 8 nos. of LED outputs external interface
  • Software to write programs and implement in the kit
  • Power supply, Casing to keep the kit safe and detailed Instruction Manual and all the Programs
9. FPGA Trainer Kit
Xilinx Spartan 3E family (250K gates) FPGA Trainer Kit
Features
  • Xilinx Spartan 3E Family FPGA (250K gates)
  • JTAG Programming through USB Port
  • on board PROM to store the program
  • 3 nos. edge sensitive switches, manual clock, on board clock
  • ISE 9.1i Webpack software for programming either in VHDL or Verilog
  • Simulation and Synthesis
  • 24 I/O in expansion socket for interfacing external application
  • The following interfaces are built in
    • a. 16 input switches, 16 output LEDs, one 8 bit bi directional I/O with switches and LEDs
    • c. 4 nos. of seven segment display interface
    • d. 2 line 16 character LCD Interface
    • e. 4 x 4 Matrix Keyboard Interface

Interface Boards for Microprocessor Kits and 8051 Microcontroller Kits

1.Switches and LEDs
  • 8 switches
  • 8 LEDs
2.Seven Segment Display Interface – 6 digit
  • 6 nos. of seven segment display
  • Multiplexed multi digit display
3.Digital I/O interface board
  • 8 nos. of toggle switches and 8 nos. of LEDs, Input devices: LDR, Reed Relay, Push Button and Opto Interrupter, Output: Relay, Opto coupler, Piezo buzzer and speaker
4. Matrix Hex Key board and Single digit display
  • 4 X 4 Matrix 16 Key Keyboard
  • 1 Seven Segment Display to display the keycode
5. LCD display
  • 2 lines and 16 characters LCD
  • Hex code to alpha numeric characters
6. Traffic Light Controller
  • 4 junction Road, 4 set of Red, Green and Yellow LEDs
  • Pedestrian Crossings bi-colour LEDs
  • Control switch to control to blink the LEDs during night
7. 8 bit ADC Interface
  • 8 channel, 8 bit ADC 0809 based
  • Thermistor LM 35 input in one channel with x2 amplification
  • 0-5V variable input in another channel
  • 8 LEDs to see the digital output in binary
  • Necessary control signals for ADC 0809
8. 8 bit DAC Interface
  • Single channel DAC 0808 based
  • Provision to fix the reference current
  • Current to voltage converter at the output
  • One channel DAC output 0-10V
  • 8 bit input from the controller
9. Stepper Motor interface board
  • Small Stepper Motor
  • Driver Circuit for the Stepper Motor
  • Switches to give control inputs (direction, speed, step)
10. DC Motor Interface Board
  • Small DC Motor
  • Speed control circuit using PWM technique
  • Thumb Wheel Switch for duty cycle input
  • H Bridge output for driving DC Motor
  • Control switches to give control inputs (direction and speed)
11. Elevator simulator
  • Switches for ground + 3 floors
  • LEDs to indicate at which the Lift stops
  • LEDs to show the movement of the Lift
12. Lift Control
  • 3 floors (Ground plus two floors) Plastic model, Floor request switches and Floor sensing switches, Cabin – Geared DC Motor with forward and reverse control
  • Proper termination to wire inputs and outputs

System based Interfaces

1. IC 8255 Programmable Peripheral Interface
  • Necessary Signals to interface IC 8255
  • Mode 0 and Mode 1 operations
2. IC 8253/IC 8254 Programmable Timer / Counter Interface board
  • Necessary Signals to interface IC 8253 (3 independent timers)
  • Clock, Switches, Relay and Speaker
3. IC 8279 Programmable Keyboard / Display Interface board
  • Necessary Signals to interface IC 8279
  • 16 Hex keys and 6 digit seven segment displays
4. IC 8251 Serial Port Interface
  • Necessary Signals to interface IC 8251
  • Clock generation, Division of clock
  • Transmission and reception of serial data
5. IC 8259 Programmable Interrupt Controller Interface
  • 8 External Interrupts
  • Necessary Signals to interface IC 8259
  • Priority and cascading signals